The Most-Trusted Concrete Contractors in Onslow County
Jacksonville Concrete Contractors handles concrete installation, repair, replacement and decorative finishing on the driveways, patios, slabs and walkways that Onslow County homeowners, landlords and light-commercial property owners use every day. We're the concrete contractors Jacksonville NC property owners can reach with one call. We handle driveway installation and replacement, driveway aprons, plain and stamped concrete patios, garage floors, shed and RV pads, sidewalks and steps, pool decks, footings and monolithic slabs. We also repair, resurface, level, remove and seal existing concrete, and we pour decorative finishes and retaining walls. Our crews work in Jacksonville and the towns within about an hour's drive, including Hubert, Sneads Ferry, Holly Ridge, and Richlands.
Every job starts with a written scope that names the thickness, the base, the reinforcement and the joint spacing before anyone quotes a price. We follow the code and permit rules for your project, check whether a new driveway connection needs a state permit, and schedule termite pre-treatment before home slabs.
Get a FREE Quote



Most concrete advice online is written for places where freeze-thaw cycles break slabs apart. Jacksonville's January average low is 36°F (WeatherSpark), so that is rarely what fails here. Two soil series common on the Lower Coastal Plain behave almost oppositely under a slab. Baymeade sand is well drained and moves water fast. Onslow-series soil holds a seasonal high water table (the level groundwater rises to in the wet season) around 18 inches below the surface for two to four months of most years (USDA Baymeade · USDA Onslow).
Add about 48 inches of rain a year, plus storms like Hurricane Florence, which dropped more than 30 inches on parts of eastern North Carolina in 2018 (National Weather Service). On many lots in Onslow County, rain carries sand out from under the slab edges (washout and undermining), and the first sign is usually a corner break. So we put our effort underneath the concrete. That means a checked subgrade (the soil the slab sits on), a compacted base, drainage slope away from the edges, and joints placed before the slab picks its own crack line.
July here averages a high of 88°F, and the air stays muggy from mid-May into early October (WeatherSpark). Hot, windy afternoons pull water out of fresh concrete faster than it can cure, and that's where plastic shrinkage cracking (fine cracks that form while the concrete is still soft) starts. We follow the hot weather concreting practice in ACI 305R, as the NRMCA summarizes it. That means pouring in the cooler part of the day, keeping an evaporation retarder on hand for wind, and wet curing under burlap and plastic for at least three days (NRMCA Concrete in Practice 12). Among concrete companies in Jacksonville NC, the difference that shows up years later is whether the pour was timed to the weather or to the truck.
North Carolina requires termite protection on new homes, and the soil under and around a slab has to be treated before the concrete goes down (NCDA&CS · NC State Extension). Once the slab is poured, that soil is out of reach. A licensed pest-control operator applies the termiticide. Our job is to set the pour date around that treatment on house slabs and monolithic slab foundations, so it doesn't get skipped in the rush to pour.
Concrete shrinks as it cures, and it will crack somewhere. A control joint decides where. We space joints no more than two to three times the slab thickness in feet, which works out to 8 to 12 feet on a 4-inch slab. Each one is cut to a joint depth of one quarter of the slab. In hot weather we sawcut within 6 to 12 hours of finishing (Concrete Network), because waiting until tomorrow lets the slab crack first.
Two quotes for the same driveway can look alike and describe very different slabs. Ours names the thickness, the base, the reinforcement (rebar, wire mesh or fiber mesh), the joint spacing and the mix's compressive strength in psi. We don't add water at the truck to make concrete easier to spread. Extra water raises the slump (how runny the mix is) and the water-cement ratio, and a higher water-cement ratio means a weaker slab. When you're weighing us against the cheapest bid, that list is what makes the comparison fair.
North Carolina counties don't own public roads, and NCDOT maintains about 80,000 miles of them (Carolina Public Press). So if you're outside city limits and adding or widening a driveway onto a state-maintained road, you need an NCDOT Street and Driveway Access Permit through the District office. Simple requests take about four weeks (NCDOT driveway permit FAQ). Inside Jacksonville city limits, right-of-way work goes through the city instead. Jacksonville Concrete Contractors checks which rules apply to your address before we promise a pour date.

Crumbling edges on a driveway that's only a few years old usually start underneath. On sandy lots, the cause is a base that was never compacted, a slab poured too thin for the vehicles on it, or joints cut too far apart.
Our concrete driveway installation starts with the ground: we grade the subgrade and build a compacted base of ABC stone (crushed stone) before the forms go up. Four inches is the standard minimum thickness for a residential driveway, and heavier vehicles need more. Where tires ride the sides we pour a thickened edge, and where backing onto the road isn't safe we add a turnaround pad. Your quote lists the mix's compressive strength in psi. The surface gets a broom finish for traction and a control joint every 8 to 12 feet on a 4-inch slab.
Your new concrete driveway in Jacksonville NC sheds water, stays grippy in the rain, and if it ever cracks, it cracks along the joints we cut.

If rain runs toward your house after every summer storm, the patio was poured flat or tilted the wrong way. If a web of fine cracks shows up in the first year, that's crazing: the surface dried too fast in the heat.
Every concrete patio we pour is a slab on grade (poured right on the prepared ground) with drainage slope built in, running away from the house. We place it, screed it level with a straightedge, and choose a broom texture for open areas or a smooth trowel finish under a covered porch. Then we keep the surface under wet curing or a curing compound so the top doesn't dry out ahead of the slab below. It's the step outdoor concrete contractors skip most often.
The patio sheds water, keeps its surface and gives you a level spot for furniture and a grill for years.

Jacksonville Concrete Contractors builds sidewalks that improve pedestrian access around homes, businesses, and shared property areas. We establish a consistent grade, form clean edges, position control joints, and apply a broom finish for reliable footing. Proper panel alignment and smooth transitions at driveways, entries, and existing walkways help reduce trip hazards and improve everyday access.

Our Jacksonville concrete installation team builds walkways that connect doors, patios, parking areas, gates, and landscape features. We size and shape each path around its intended use and surrounding landscape. A well-planned pedestrian route includes appropriate width, smooth transitions, and a stable landing where changes in elevation occur. These details support accessibility and safe passage through the property.

Jacksonville Concrete Contractors forms and pours concrete steps and stairs with consistent risers, properly sized treads, stable landings, and sound formwork. Our crew reviews the entry grade and any planned handrail connections before placement. We use a traction-focused surface finish on walking areas and carefully transition new steps into adjoining slabs or walkways for safer access during wet weather.

Our Jacksonville concrete crew installs pool decks with drainage, texture, and coping connections in mind. We place expansion joints where needed and use surface finishes that support barefoot traction. Careful slope directs water away from structures and high-use areas, while compatible sealers can help protect decorative finishes and simplify ongoing maintenance.
As a concrete slab contractor in Jacksonville, NC that property owners rely on, Jacksonville Concrete Contractors installs slabs for buildings, additions, workshops, and utility areas. We evaluate soil conditions, compact the base, set forms, place rebar or wire mesh as appropriate, and install control joints before finishing. Slab thickness, reinforcement, and finish depend on the intended use. A storage building slab has different demands from a slab carrying equipment or regular vehicle traffic.

Our Jacksonville concrete crew installs equipment pads, shed bases, HVAC pads, utility equipment pads, and other level bases. Each pad is sized for the equipment or structure it supports and positioned with drainage and access in mind. A correctly sized pad keeps equipment supported and separated from surrounding soil. We verify dimensions, thickness, and access requirements before work begins.

Concrete foundation projects in Jacksonville, NC require accurate excavation, formwork, steel reinforcement, and a plan that follows the applicable structural design. Footings distribute structural loads into prepared soil, while foundation walls or slabs create the base for the structure above. Our Jacksonville concrete foundation team works from approved plans and site specifications, coordinating grade, rebar placement, drainage, and concrete placement with the broader construction project.

A garage floor that's wet on muggy mornings looks like a leak, but often the slab is sweating. When warm, humid air meets a slab cooler than its dew point (the temperature at which moisture condenses), water forms on the surface. A floor coating won't stop that condensation.
The model code, IRC R506.2.3, calls for a vapor retarder (a plastic sheet under the slab) of 6-mil polyethylene under floor slabs. It exempts garages, driveways, walks and patio. So the model code doesn't require one under a garage floor, and we ask before the pour whether you want one anyway. We finish the garage floor with a smooth trowel finish that sweeps clean and takes a coating well, and we slope it toward the door.
The garage floor is built for how you'll use it, with the moisture question settled before the concrete truck arrives.

Jacksonville Concrete Contractors constructs concrete retaining walls that support grade changes and manage soil pressure. A retaining wall needs a suitable footing, reinforcement, drainage provisions, backfill planning, and a structural assessment matched to its height and location. Our team reviews Jacksonville property grades and water movement before construction because drainage behind the wall helps reduce hydrostatic pressure and stress on the structure.

Concrete crack repair work in Jacksonville, NC starts by examining the crack’s width, movement, depth, moisture exposure, and surrounding slab condition. Our Jacksonville concrete repair team cleans and prepares the damaged area before applying an appropriate repair mortar, patching compound, or bonding agent. Cracks linked to settlement, drainage failure, or continuing movement need the cause addressed alongside the surface repair. Correcting the underlying condition helps reduce the chance of recurring damage.


Our concrete driveway repair service in Jacksonville, NC handles surface wear, cracking, joint damage, unevenness, and localized deterioration from vehicle traffic. We inspect control joints, drainage patterns, and the condition of the underlying support before recommending repair or replacement. Resurfacing works best when the driveway remains structurally sound and stable. Sections with extensive movement or failed subgrade often require removal and replacement.
Concrete patio repair projects in Jacksonville, NC restore outdoor living surfaces affected by cracks, pitting, surface damage, or unevenness. Jacksonville Concrete Contractors can repair localized damage, apply a resurfacer or overlay, and renew the finish with texture, stain, or sealer where appropriate. Proper surface preparation is essential for a durable patio restoration. Our crew removes loose material, cleans the slab, addresses bonding conditions, and checks drainage before applying new material.


Our concrete resurfacing services in Jacksonville, NC renew worn but stable concrete with a bonded overlay or resurfacer. It can improve appearance, texture, wear resistance, and color consistency on patios, walkways, garage floors, and similar flatwork. Before resurfacing, Jacksonville Concrete Contractors checks for scaling, spalling, moisture problems, and active movement to confirm the existing slab is a suitable base for an overlay.
Concrete removal and replacement projects in Jacksonville, NC provide a fresh start for slabs with extensive failure, major settlement, or severe surface deterioration. Our Jacksonville concrete crew demolishes and hauls away the failed slab, corrects underlying grading or subgrade issues, then forms, reinforces, and pours the replacement. Removing the old concrete also exposes hidden base and drainage problems that may have contributed to the original failure.


Our stamped concrete service in Jacksonville, NC creates stone, brick, wood, and custom texture patterns in freshly placed concrete. Jacksonville Concrete Contractors uses stamping mats, integral color, release agents, borders, and compatible sealers to create the selected look. Stamped concrete works well for patios, walkways, entries, and pool-adjacent areas where visual detail supports curb appeal or outdoor living. We discuss pattern scale and traction requirements during design consultation.

Decorative concrete options in Jacksonville, NC bring custom color, texture, borders, and surface design to ordinary flatwork. Our Jacksonville concrete specialists can incorporate decorative features into patios, walkways, driveway borders, pool decks, and entry areas. A decorative finish still needs the same sound base, joints, drainage, and curing as standard concrete. We coordinate the design before placement, so color, pattern, texture, and finishing steps work together.

Stained concrete applications in Jacksonville, NC add color variation to prepared interior floors and exterior slabs. Concrete stain works with the existing surface character, so preparation directly affects color acceptance and final appearance. Jacksonville Concrete Contractors applies compatible sealers when the surface and intended use call for added protection. Maintenance includes routine cleaning with products suited to the selected sealer.

Our concrete finishing work in Jacksonville, NC includes broom finishes, smooth troweled surfaces, edging, joint cutting, decorative texture, and sealer application. The Jacksonville Concrete Contractors team matches the finish to the surface’s function, whether it handles foot traffic, vehicles, pool use, or interior activity. Broom finishing remains a practical choice for sidewalks, driveways, ramps, and steps because it improves traction. Decorative finishing can add visual depth while preserving functional surface texture.

Concrete parking areas for Jacksonville, NC businesses require planning for vehicle traffic, traffic flow, loading zones, grading, and drainage. Our commercial concrete crew establishes the layout, base requirements, slab thickness, reinforcement, and control-joint pattern around the expected use. We also coordinate ready-mix access, equipment movement, active business operations, and cleanup to reduce disruption during the project.

ADA concrete ramps for Jacksonville, NC properties require appropriate slope, cross slope, landings, transitions, curb interfaces, and pedestrian access. Jacksonville Concrete Contractors reviews the route and surrounding grade before forming and finishing the ramp. Our Jacksonville concrete team carefully lays out transitions, traction-focused surfaces, handrail interfaces, and connection points to support accessible movement and applicable project requirements.
Concrete costs in Jacksonville reflect the work required to create a stable, properly finished surface. We provide a project-specific estimate after reviewing the site, dimensions, intended use, and access conditions.
For budgeting purposes, Jacksonville property owners can use these general ranges:
For example, a 400-square-foot reinforced slab may cost roughly $3,600–$6,200, while a 600-square-foot standard driveway could fall around $4,800–$7,200. Actual pricing depends on excavation, base preparation, reinforcement, concrete thickness, finish, drainage, and site access.

A concrete estimate Jacksonville, NC property owners receive from us is based on an on-site review whenever conditions require it. Jacksonville Concrete Contractors measures the area, checks drainage and existing concrete, confirms the finish, and provides a clear concrete quote that Jacksonville, NC customers can use for planning.
Our installation process follows a practical sequence that helps prevent avoidable base, drainage, and finishing issues. Jacksonville Concrete Contractors coordinates each stage around the site conditions, project scope, and intended use.
We measure, check drainage and the soil, confirm whether a permit or termite pre-treatment applies, and put thickness, base, reinforcement, joint spacing and mix strength in writing. That answers what to ask a concrete contractor before you have to ask it.
Concrete site preparation includes excavation where needed, grading, subgrade compaction, aggregate base installation, drainage adjustments, and forms. Our crew checks the grade, slope, and form alignment before concrete placement begins.
Jacksonville Concrete Contractors installs rebar or wire mesh where the project design or load requirements call for added reinforcement. Reinforcement works together with proper slab thickness, base preparation, control joints, and curing.
Our crew places and consolidates ready-mix concrete, screeds and levels the surface, forms the joints, and applies the selected finish. Broom finishes provide traction for many exterior surfaces, while smooth or decorative finishes suit other applications. After finishing, we begin the curing process and provide guidance on when the new concrete can safely handle foot or vehicle traffic.
We walk the finished work with you, tell you when it can take foot and vehicle traffic, and give you the sealing and maintenance schedule in writing.



1. Cracks that don't follow the joint lines
Best match for: driveways and patios poured without planned joints, or with joints cut too late.
Symptoms: random cracks across panels, often in the first year, and fine surface crazing.
Fixes: crack filler on stable cracks, resurfacing where the slab is sound, and replacement with correct control joint spacing where it isn't.
Average cost: resurfacing runs $3–$10 per square foot
2. Edge washout and corner breaks after heavy rain
Best match for: slabs on sandy lots with poor drainage slope, especially after a wet storm season.
Symptoms: voids under slab edges, a corner break, panels tipping or sinking.
Fixes: slab jacking or polyurethane foam leveling plus a drainage fix, or tear-out and a rebuilt base where panels have broken.
Average cost: removal runs $3–$8 per square foot including disposal; leveling is quoted per job.
3. Slick pool decks and sweating garage floors
Best match for: stamped pool decks under film-forming sealers, and garage slabs in the humid months.
Symptoms: slippery wet surfaces, and damp garage floors on muggy days.
Fixes: grit in the sealer or a switch to a penetrating sealer for decks; for new garage slabs, a vapor retarder decision before the pour.
Average cost: sealing runs $1–$2 per square foot
Jacksonville Concrete Contractors serves homeowners, businesses, builders, and property managers throughout Jacksonville, Onslow County, and nearby Coastal North Carolina communities. We provide concrete installation, repair, resurfacing, and replacement across the following service areas:
Concrete installation in Jacksonville, NC typically costs about $6–$11 per square foot for standard concrete work. For reference, a 400-square-foot reinforced slab may cost about $3,600–$6,200, while larger driveways can cost more depending on size and reinforcement. Removal of existing concrete may add about $1.20–$1.90 per square foot. Jacksonville Concrete Contractors provides a project-specific estimate based on site preparation, thickness, reinforcement, finish, drainage, and access.
A standard concrete driveway installation typically takes several working days from site preparation through pouring and finishing. Weather, driveway size, existing concrete removal, and site access can affect the schedule.
New concrete can usually handle careful foot traffic after 24 to 48 hours, depending on weather and curing conditions. Vehicle traffic requires a longer wait, and concrete continues gaining strength during the first 28 days.
Yes, when weather and site conditions allow proper placement and curing. Jacksonville Concrete Contractors plans pours around Jacksonville’s coastal rainfall and drainage conditions and protects fresh concrete from excessive moisture during curing.
The main difference is how the concrete’s appearance is changed. Stamped concrete creates patterns and texture, stained concrete changes the surface color, and decorative concrete is the broader category that can include stamping, staining, borders, custom textures, and specialty finishes.
Keep concrete clean, maintain proper drainage, clear debris from joints, and address cracks or surface damage early. Jacksonville Concrete Contractors also recommends inspecting sealed or decorative surfaces periodically and resealing them when the protective finish begins to wear.
Yes, for passenger cars and light trucks. Four inches is the standard minimum for a residential driveway, and heavier vehicles need more. If you park an RV, a boat trailer or work trucks, plan a thicker slab or a thickened edge, built on a compacted base either way.
No, not always. Many 4-inch patios and walks use wire mesh or fiber mesh, and some use none, because control joints do most of the crack control. If reinforcement goes in, it has to sit on rebar chairs in the middle of the slab. Steel lying on the ground underneath does almost nothing.
Either can work, and placement matters more than the choice. Rebar holds cracked sections together under heavier loads, while wire mesh is common in lighter residential slabs. Both only help when they're supported on rebar chairs mid-slab during the pour. We note which one your driveway gets, and why, on the written quote.
Yes, in most cases. A compacted base, often ABC stone in North Carolina, gives the slab uniform support and helps it drain. On the sandy soils common around Jacksonville, the subgrade also needs compacting before the base goes down, because loose sand settles and washes out from under slab edges.
Four inches is standard for patios, walkways, shed pads and garage floors under passenger cars. Heavier loads, such as RV pads, shop floors and equipment pads, often call for six inches or a thickened edge. HomeGuide prices 4-inch slabs at $6–$8 and 6-inch slabs at $8–$10 per square foot.
About 14.8 cubic yards at 4 inches thick. A 30-by-40-foot slab at one-third of a foot deep is 400 cubic feet, and a cubic yard holds 27 cubic feet. At 6 inches it's about 22.2 cubic yards. Crews usually order slightly extra to cover variation in the subgrade.
A 20x20 slab, 400 square feet, typically runs $2,400–$4,800 installed, based on $6–$12 per square foot. Thickness, finish, site prep and tear-out of old concrete move the number within that range. No published source gives a Jacksonville-specific price, so your written quote is the figure to rely on.
A 12x12 slab, 144 square feet, typically costs $860–$1,700 installed. Small slabs cost more per square foot than large ones, because setup, forming and delivery costs stay roughly the same whatever the size. Base prep, thickness and finish account for most of the spread.
Ready-mix averaged about $179.95 per cubic yard nationally in 2025, with most quotes between $160 and $195 or more. No published source gives a Jacksonville-specific price per yard. Delivery distance and small-load charges raise the per-yard price, so ask for the total delivered cost.
Yes, plain concrete usually costs less. HomeGuide puts plain concrete patios at $5–$10 per square foot, stamped concrete at $8–$19 and pavers at $10–$17. Stamped concrete overlaps with paver pricing, so compare quotes on the same square footage before choosing.
Yes, on materials for a small pad. The risk is the finishing window: in Jacksonville's summer heat, concrete sets fast, and a DIY slab without a compacted base or cut joints often cracks. Removing a failed slab runs $3–$8 per square foot, which usually erases the savings.
Yes, for small jobs. North Carolina requires a general contractor license only for projects of $40,000 or more, so most patios and walks fall below that line. That also means a license alone doesn't screen concrete contractors. Ask for proof of insurance and a written scope instead.
Ask for proof of insurance and a written scope that names slab thickness, base, reinforcement, joint spacing and the concrete's compressive strength. Get deposit and payment terms in writing. Look at work that's at least a few years old, and ask how the contractor handles hot-weather pours and drainage on sandy lots.
Cash-only payment, a large deposit before any work is scheduled, and no written contract are the classic warning signs. For concrete specifically, watch for a quote that never mentions the base, joints or reinforcement, and a crew that plans to add water at the truck to make the concrete easier to pour.
We serve Onslow County and nearby towns, including Hubert, Sneads Ferry, Holly Ridge, Richlands, Swansboro, Hampstead, Surf City, Cape Carteret, Cedar Point and Emerald Isle, plus the surrounding Onslow County communities.
Jacksonville Concrete Contractors provides reliable concrete installation, repair, and replacement throughout Jacksonville, NC and nearby communities. Contact us today to request a free estimate for your driveway, patio, slab, walkway, or other concrete project.
© 2026 Jacksonville Concrete Contractors. All rights reserved.